Just a quick note here to let all the low float and gap traders out there know that I just updated the low float lists again as of this evening. I realized it was about time to release an update so I went ahead and put the elbow grease in :-). Moving forward, I have added a reminder to my work calendar to go in and update the lists every 2 months.
For those of you who have already purchased the low float stock scan, the new list installation links should be in your order detail page in your My Account > Orders area when you login to your account.
For anyone who’s interested in trading low floats in ThinkOrSwim but hasn’t figured out how to yet, here’s the main low float watch list page where you can learn more about our workaround.
Thanks for being awesome, and enjoy the rest of the week!
I want to be sure I’m providing a really good value for what I do, and that I respond to feedback from my customers. To that end, I spent a lot of time doing a complete overhaul of the pre-market gap scan set for the Stock Hacker scanner in ThinkOrSwim. To be clear, the old set of scans worked great, and I use modified versions of them all the time. But I wanted to make the scans even more powerful and full-featured so that they really do the best job they can possibly do. So today I’ve released the new version 2.0 gap scans, and EVERYONE who has purchased the scans in the past gets a free upgrade. You’ll notice the new links in your My Account > Orders > Order Details section automatically. Also, for those that haven’t purchased a copy yet, the scans are on sale this month here.
What’s New with the Pre-Market Gap Scan
First, there are a lot more of them, and all of them are more full-featured and easier to customize. They’re also more consistently setup, with cleaner code and comments.
Second, all the scans are set to find gaps greater than a certain percentage change, and you can now change that percentage to whatever you want for all of the scans!
Third, you’ll notice some new scans in both the pre-market group and the regular hours group. In the pre-market gap scan group, I’ve included a set of scans that finds what I call “insignificant” gaps, or gaps from the close, not from the high or low. Basically just a pre-market mover stock where there’s a gap between yesterday’s closing price and today’s opening price, even if that doesn’t take the open outside of yesterday’s range altogether.
Technically, a gap is any stock that OPENS higher than the previous day’s high, or lower than the previous day’s low. But if you run regular hours scans later in the day, the stocks might not all look like gaps because some of them have already filled the gap (i.e., even though a stock might have opened below yesterday’s low, today’s trading has moved the high so that it is now equal to or higher than the previous day’s low, for example, filling the a gap down). So one or two people got confused when my regular hours scans included these stocks that had later filled their gaps. I explained it to them, but I figured it would be even better to give everyone both options so you can weed out the ones that have already filled the gap, if you want to. So you’ll notice those scans below under “regular hours”.
All Version 2.0 Gap Scans Default to these Settings:
Last Price Between $5 – $200
Avg. Daily Volume > 500,000
Avg. True Range > .5
Gap >= 1%
All these settings can be adjusted and my comments inside the scan should help you do that if needed. Just use the drop-downs and input fields, or click the pencil icon next to any filter to change it. If you want to remove a filter altogether just click the X on the right hand side of the StockHacker window for that line of the scan. Be sure to save a new copy with a new name to apply the changes.
PRE-MARKET GAP SCAN – AFTER HOURS / EXTENDED HOURS SCANS
All Significant Gaps > X% From High Or Low
Significant Gaps Up > X% Above High
Significant Gaps Down > X% Below Low
All Tier 1 Significant Gaps > X% from High or Low
Tier 1 Significant Gaps Up > X% above High
Tier 1 Significant Gaps Down > X% below Low
All Gaps from Close (instead of hi/low) > X%
Gaps Down from Close (instead of low) > X%
Gaps Up from Close (instead of high) > X%
REGULAR TRADING HOURS SCANS
Gaps That Haven’t Filled Yet
All Significant Gaps (+ haven’t filled) > X%
Significant Gap Ups (+ haven’t filled) > X%
Significant Gap Downs (+ haven’t filled) > X%
All Tier 1 Gaps (+ haven’t filled) > X%
Tier 1 Gap Downs (+ haven’t filled) > X%
Tier 1 Gap Ups (+ haven’t filled) > X%
Gaps That May or May Not Have Filled
All Significant Gaps > X%
Significant Gap Ups > X%
Significant Gap Downs > X%
All Tier 1 Gaps > X%
Tier 1 Gap Downs > X%
Tier 1 Gap Ups > X%
I always refer to gaps in terms of either being insignificant, significant, or tier 1. That’s just how I learned to think about them, but to translate my “trader speak,” here’s a quick definition of each:
Insignificant: A gap from the close, where the open has moved > X% from yesterday’s CLOSE, but where the stock may or may not be opening outside of yesterday’s range altogether. These are basically just a good, cleaned up list of pre-market movers, and this is the broadest type of gap scan you can do.
Significant: A gap from the high or low, where the open has moved > X% from yesterday’s HIGH or LOW, and thus the stock is opening completely outside of yesterday’s range. These are “true” gaps.
Tier 1: A significant gap in the opposite direction of yesterday’s price movement. So if yesterday was a green up bar, today is a significant gap below the low of yesterday. Or if yesterday was a red down bar, then today is a significant gap up over yesterday’s high. Basically the gap is negating all price movement from yesterday and “shocking” traders who wake up and see their positions suddenly in the red. There is a greater likelihood to see some panicked covering of positions at and near the open, and especially at any early retrace toward yesterday’s price where trapped traders will try to get out nearer to break-even.
Low Float Stocks
Just a quick note here: I know a lot of pre-market gap scan users also trade low float stocks. Low float stocks that gap in the morning can often create a real spike in price movement a make a trader a lot of quick profit if they’re on the right side of that price movement. But trading these setups used to be next to impossible to do within ThinkOrSwim, so most people had to pay for a standalone scanning service like Trade Ideas at god-awful subscription rates.
However, recently I came up with a workaround that has been doing well for TOS traders — I’ve painstakingly created 5 custom static lists of stocks, with floats less than 10 million, 20, 30, 40, and 50 million shares float each, and I have posted those for sale over here.
And it gets better. All the gap scans can be set up to run only on the low float lists, thus only returning low float gapping stocks. So now if you purchase both products in the shop area, you can not only scan for normal gaps, but also for the low float gaps so many people are looking for ways to find now.
If you have any ideas for improvements to either the pre-market gap scan or the regular hours gap scan, I’m happy to hear them. Also, since this is a big release, I’m sure there might be a bug or two found during the first few weeks, so let me know if you spot anything weird.
I recently finished up a complete redesign of my ThinkOrSwim Position Sizer, and I wanted to post a quick announcement and go over some of the new features. I’m pretty excited about what I’ve been able to do with it, and I really hope others will find it as useful as I do.
The original implementation was basically a candle high/low position sizer. It calculated entries 1 tick above the high and your stop was 1 tick below the low of the candle, and it would size your position based on that stop size. Additionally, it only worked on stocks. I had originally made it to help me quickly calculate price action entries and exits and get the right number of shares each time, and it did that well for me, but wasn’t very flexible for other traders’ needs.
The new indicator is completely different and vastly more powerful.
Works on Stocks, ETFs, and now Futures too!
Automatically account for the minimum tick size and tick value of futures contracts
Choose a percent of your buying power to risk on each trade
Script automatically grabs your current account balance and calculates the right amount of shares/contracts to buy based on your predefined risk tolerance
Optionally specify a manual/theoretical account balance
Specify a buying power multiple (2x or 4x account balance, etc., or just leave at 1x to use no margin leverage)
NEW STOP TYPES!
Candle/bar price action stops and entries as before
Specify a custom ATR multiple to use for stops
Change every aspect of how the ATR is calculated if desired
Choose between 4 different DevStop standard deviation levels
New entry methods!
Choose trade direction, long or short
Specify to calculate entries from the close, open, high, or low
Add custom padding for slippage or breakout entries to both entries and stops
Example 1: enter 1 tick above the high of a candle, stop 1 tick below the low, etc., to simulate a stop-market entry and exit
Example 2: assume 1 tick slippage on entries and stops, regardless of entry type
New target methods!
Choose an automatic target based on a multiple of your risk (stop size).
Example: if your stop size is $2, you can specify a 1:2 risk/reward ratio, and it will automatically calculate your target price as $4 above your entry
Choose a manual target price for your trade and automatically get the risk/reward in both Risk Units (Rs) or in percentage terms
Optionally round the shares or contracts to the nearest 10, 100, or whatever other number you specify
Show/hide any labels or lines on the chart
Change label and line colors as desired
Question mark icon / Tooltip for each option explains every setting in detail
How to Get the Updated Version
A quick note: previous purchasers will OF COURSE get the updated version for free! I really appreciate your support, and the updated links will be waiting for you in the My Account area under My Orders, as with all updates I release. If you have any trouble getting the links, just contact me and I’ll make sure you get setup.
If you haven’t purchased the Think-Or-Swim Position Sizer yet but you think it will be of benefit to your trading, you can pick up your copy here: